Hi, Having some issues with the new RC7 WSJT-X release.
FlexRadio 5000 Windows 10 BKTimeSync for correct time I have been using wsjt-x since before it was publicly released, and have gone through all the versions without issue. I've pretty well mastered it over the years, and use it daily. Doesn't mean I still can't make dumb mistakes Running older wsjt-x 2.0.1 in receive only, on the flex 2nd receiver just to monitor 10 metres. Works great, no issues whatsover. Running RC7 on the main flex receiver, where i do all my transmitting / receiving. I noticed there were many signals on the waterfall, but almost none were decoding. Looking at the decode siplay, I noticed the time offsets for all stations were over 2 and higher , up to 2.5. At the same time, my older version on the 2nd receiver was showing various times but all below 0.5 I restarted the software, no change.I swithced from 64 bit version to 32 bit version , no change. I did notice that when I shut down wsjt-x, the time offeset is fine for a few decodes, then goes up over 2 seconds again. Changed the DECODE menu from Deep, to Normal, and even FAST but no difference. I restarted the computer, the flex, everything i could think of. I deleted BKTimeSync and went to Dimension4. Restarted wsjt-x and it was great, then back to over 2 seconds. I did notice that occassionally the times are normal, then on the next exchange back to over 2 secs I am attaching an example from this morning's 6 metre opening. Throughout all of this, the 2.0.1 version works fine. CPU demand is low, shutting down the second 2.0.1 version , all applications still makes no difference. The computer is only used for wsjt-x, the flex radio, and logging. Nothing else goes on there. I think I've tried everything and I'm stumped [image: image.png] Thanks, Tim Pacan VA3FU
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
