On 6/27/19 at 12:31 PM, jack.s.phogbo...@rf-specialist.net (Jack
S. Phogbound) wrote:
1) Has positive PTT control (this is not possible with the Signalink USB!)
The SignaLink has an internal VOX which can be used to trigger
PTT on a rig. It is available on one of the pins of the RJ-45
"Radio" connector on the back. I built a cable to use it with my
K3and it worked very well.
Note that VOX works very well with digital modes since they are
either full on or off, so there is a broader range of
sensitivities where they work as compared with voice.
Note also that you can use the CAT interface for PTT with wsjt-x.
73 Bill AE6JV
------------------------------------------------------------------------
Bill Frantz |"Insofar as the propositions of mathematics
refer to
408-356-8506 | reality, they are not certain; and insofar
they are
www.pwpconsult.com | certain, they do not refer to reality.”
-- Einstein
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel