On 18.7.2019 1.02, Joe wrote:
No change, it changes to RED and stays that way forever and nothing
happens.
Hmm, that's stange...
Have you also enabled some of the lines on the "Colors" tab?
Here's how I have set them up ( your preferences may differ .. )
'Kari
Joe WB9SBD
On 7/17/2019 9:57 AM, Joe wrote:
as not checked, but now is, will try it later and see what happens.
Thanks
Joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
On 7/17/2019 9:25 AM, Kari wrote:
On 17.7.2019 16.56, Joe wrote:
Yup did exactly that and it did nothing.
Joe WB9SBD
Hi Joe, please make sure that you have enabled
"Show DXCC, grid, and worked-before status"
in "File => Settings => General"
BR, Kari
On 7/16/2019 11:16 PM, Neil Zampella wrote:
Actually, it does. It needs to be clicked on during the Rx
period, and its only active during that initial period. Just
tested it ... clicked on the button, and it selected and send a
reply to a station calling CQ. I noticed that when I clicked on
the button, the wording was 'highlighted' in red. After the
program sent the Tx1 reply, the button reverted back to normal
Neil, KN3ILZ
On 7/17/2019 12:01 AM, Joe wrote:
Plus,
it doesn't do anything.
Joe WB9SBD
On 7/16/2019 5:07 PM, K2DBK-WSJT wrote:
It’s documented in the FT4 protocol guide:
“The FT4 Protocol pdf says: "Clicking this button during an Rx
cycle arms the program to examine all CQ messages decoded at the
end of the 6-second Rx sequence. The program will select the
best potential QSO partner (from a contesting perspective), and
treat it as if you had double-clicked on that line of decoded text.”
Dev Team: I know you always say to read the manual, and I was
going to reply with same to the original poster, but this was
really buried. It’s not in the full manual (or if it is, it
doesn’t show up as with a text search for “best S&P”. I found it
mentioned in the dev mailing list archives which mentioned the
FT4 protocol guide, which I had to use Google to find.
Would it be possible at some point to update the main
documentation to include this?
*From:*Joe <n...@mwt.net>
*Sent:* Tuesday, July 16, 2019 2:59 PM
*To:* wsjt-devel@lists.sourceforge.net
*Subject:* [wsjt-devel] BEST
What does this do?
And how does one use it?
Joe
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
Virus-free. www.avg.com
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
