"You should also note that the frequency is immediately reset back to
where it was before the resolution test started.:
Bill,
I provided an example that showed the frequency was not reset to the pre-test
value. Here is another which shows the freq offset was applied to the receive
and transmit frequency and the frequency error persisted for about 12 minutes.
Note that data is only output to the log when a value changes:
2019-07-16 20:39:49 84:15:21.212 backlight off
2019-07-17 05:52:21 93:23:18.405 New IF - IF00007074055
004100005020010000; <<<< RX freq +055
2019-07-17 05:52:21 93:23:18.408 backlight on
2019-07-17 05:52:21 93:23:18.420 New FA - FA00007074055;
2019-07-17 05:52:21 93:23:18.422 New RX freq=7074055
2019-07-17 05:52:21 93:23:18.424 split offset = 945
2019-07-17 05:53:00 93:23:56.365 New IF - IF00007075055
004100005121010000; <<<< Transmitting with +055 offset
2019-07-17 05:53:00 93:23:56.636 New VSWR - VSWR 1.00;
2019-07-17 05:53:00 93:23:56.721 New KPA_WS - ^WS140 010;
2019-07-17 05:53:00 93:23:56.754 New FB - FB00007075055;
2019-07-17 05:53:00 93:23:57.387 New KPA_WS - ^WS150 010;
2019-07-17 05:53:03 93:24:00.079 New KPA_WS - ^WS152 010;
2019-07-17 05:53:04 93:24:00.405 New KPA_WS - ^WS000 000;
2019-07-17 05:53:04 93:24:00.595 New IF - IF00007074055
004100005020010000;
2019-07-17 05:53:05 93:24:01.399 New TX freq=7075055
<<<< controller TX freq not computed while transmitting
2019-07-17 05:53:05 93:24:01.400 split offset = 1000
2019-07-17 05:53:05 93:24:01.401 KPA band verified
2019-07-17 05:53:11 93:24:08.406 New IF - IF00007075055
004100005121010000; <<<< Transmitting with +055 offset
2019-07-17 05:53:12 93:24:08.799 New KPA_WS - ^WS140 010;
2019-07-17 05:53:13 93:24:09.806 New KPA_WS - ^WS150 010;
2019-07-17 05:53:16 93:24:12.825 New KPA_WS - ^WS027 000;
2019-07-17 05:53:17 93:24:13.165 New KPA_WS - ^WS000 000;
2019-07-17 05:53:17 93:24:13.287 New IF - IF00007074055
004100005020010000; <<< receiving with +055 offset
2019-07-17 05:59:01 93:29:55.466 New IF - IF00007075055
004100005121010000; <<< transmitting with +055 offset
2019-07-17 05:59:02 93:29:55.606 New KPA_WS - ^WS135 010;
2019-07-17 05:59:02 93:29:55.931 New KPA_WS - ^WS140 010;
2019-07-17 05:59:03 93:29:56.614 New KPA_WS - ^WS147 010;
2019-07-17 05:59:03 93:29:56.939 New KPA_WS - ^WS150 010;
2019-07-17 05:59:04 93:29:57.941 New KPA_WS - ^WS000 000;
2019-07-17 05:59:05 93:29:58.396 New IF - IF00007074055
004100005020010000; <<< receiving with +055 offset
2019-07-17 06:05:46 93:36:35.718 New IF - IF00007074052
004100005020010000; <<< receiving with +052 offset
2019-07-17 06:05:46 93:36:35.729 New FA - FA00007074051;
<<< receiving with +051 offset
2019-07-17 06:05:46 93:36:35.732 New RX freq=7074051
2019-07-17 06:05:46 93:36:35.733 split offset = 1004
<<< result of combined TX and RX offsets
2019-07-17 06:05:46 93:36:36.052 New IF - IF00007074046
004100005020010000; <<< yet another RX offset value
2019-07-17 06:05:46 93:36:36.062 New FA - FA00007074046;
2019-07-17 06:05:46 93:36:36.064 New RX freq=7074046
2019-07-17 06:05:46 93:36:36.066 split offset = 1009
2019-07-17 06:05:46 93:36:36.379 New IF - IF00007074056
004100005020010000;
2019-07-17 06:05:46 93:36:36.397 New FA - FA00007074058;
<<< yet another RX offset value
2019-07-17 06:05:46 93:36:36.399 New RX freq=7074058
2019-07-17 06:05:46 93:36:36.400 split offset = 997
2019-07-17 06:05:47 93:36:36.911 New IF - IF00007074058
004100005020010000;
2019-07-17 06:05:51 93:36:41.466 New IF - IF00007074000
004100005020010000;
2019-07-17 06:05:51 93:36:41.477 New FA - FA00007074000;
<<< RX freq back to correct value
2019-07-17 06:05:51 93:36:41.479 New RX freq=7074000
2019-07-17 06:05:51 93:36:41.480 split offset = 1055
2019-07-17 06:05:51 93:36:41.532 New FB - FB00007075000;
<<< TX freq back to correct value
2019-07-17 06:05:51 93:36:41.535 New TX freq=7075000
2019-07-17 06:05:51 93:36:41.536 split offset = 1000
2019-07-17 06:14:02 93:44:47.913 New IF - IF00007075000
004100005121010000; <<< transmitting with zero offset
2019-07-17 06:14:02 93:44:48.437 New KPA_WS - ^WS132 010;
2019-07-17 06:14:02 93:44:48.762 New KPA_WS - ^WS140 010;
2019-07-17 06:14:03 93:44:49.445 New KPA_WS - ^WS142 010;
2019-07-17 06:14:03 93:44:49.764 New KPA_WS - ^WS150 010;
2019-07-17 06:14:13 93:44:59.513 New KPA_WS - ^WS035 010;
2019-07-17 06:14:14 93:44:59.831 New KPA_WS - ^WS000 000;
2019-07-17 06:14:14 93:45:00.284 New IF - IF00007074000
004100005020010000; <<< receiving with zero offset
2019-07-17 06:14:30 93:45:16.226 New IF - IF00007075000
004100005121010000;
2019-07-17 06:14:30 93:45:16.624 New KPA_WS - ^WS000 010;
2019-07-17 06:14:31 93:45:16.950 New KPA_WS - ^WS140 010;
2019-07-17 06:14:31 93:45:17.960 New KPA_WS - ^WS081 010;
2019-07-17 06:14:32 93:45:18.176 New IF - IF00007074000
004100005020010000;
My controller log search found no instances of this test before the time I
started using ver 2.1.0. Can you please confirm that this test was not
executed in ver 2.0.1.
73,
Andy, k3wyc
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
