Tom I have to quit WSJT-X FT8 v2.1 and restart In order to Transmit after being on for a while
Also found v2.0.1 does not exhibit this issue Mike WB6DJI Sent from my iPhone > On Aug 20, 2019, at 5:14 PM, thse <thse-3.14...@cox.net> wrote: > > Hello, > Just a note about possible bug in FT8 v2.1 operation. Over long periods of > receive (>2 minutes) FT8 randomly misses either even or odd time phase > decodes (all of them) or at least does not show any in the left list box. > Clock timing is within 500mS on the computer and many signals are present > with good signal strength for decode. Whether even or odd is random and the > occurrence is also random. You can see it happen after only 2-3 minutes of > receive operation. In previous versions of software this never happened. > > Operating with windows 10 1903 and a flex 6400 radio. I can monitor the > audio level going to WSJTx using the DAX app that sets level. The level > remains pretty steady depending on the number of signals present. > > This is annoying enough that I plan to revert to the previous version of > software (v2.0.1) to prevent loss of QSOs and repeats. Hopefully this is a > known issue that has a fix. > > Otherwise thanks for a great piece of software for Ham use! > > -Tom S. > K7YMG > > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
