Hi guys
Seems it was indeed the clock.
So, I've deleted Mienberg and and in w10 pro, I set time as "Internet time".!!
I believe this sync's weekly, I'm hoping if my clock loses sync I can manually 
reset on the set time page.
So, at the mo I'm being spotted at between  0-0 and 03 a PY reported 04. 
FT4 is now decoding.
Tested with a UA9 and PY plus a few EU stn's.
Thanks for all your advice.

Ken.. G0ORH

Sent from my iPad


> On 6 Sep 2019, at 14:10, Ken Chandler <[email protected]> wrote:
> 
> Hi Don
> Clock Meiburg set running good.
> As I said FT8 is perfect decode FT4 no decodes on  a busy band on 14080.
> 250 QSO's FT4 in WWDIGI !!
> 
> Ken.. G0ORH
> 
> Sent from my iPad
> 
> 
>> On 4 Sep 2019, at 12:29, Don Hill AA5AU <[email protected]> wrote:
>> 
>> You didn't mention it and we can't assume but did you check your clock?
>> 
>> Don AA5AU
>> 
>> -----Original Message-----
>> From: Ken Chandler [mailto:[email protected]] 
>> Sent: Wednesday, September 4, 2019 4:25 AM
>> To: [email protected]
>> Subject: [wsjt-devel] FT4 no decode
>> 
>> Hi guys
>> I hope someone can make sense of this as I've completely lost all decode on
>> FT4.
>> 
>> During WWDIGI my log contained 250 odd QSO's all bands, most of those were
>> on FT4.
>> On Monday 1st sept, I set up N1MM + WSJT-X for the RSGB trial FT4 contest on
>> 80m.
>> I did some tests with a friend on the south coast and decoded ok with 100w.
>> However afterward others called in and I could not decode them.
>> During the RSGB trial FT4 contest (one hour duration) the waterfall was full
>> of stations.
>> I actually worked G4OGB early on but no other Stn was decoded though I could
>> see plenty were calling me on the waterfall.
>> I've reloaded 64bit software on an i7 Nuc, with Microham keyer, K3, with
>> this setup I've worked a few Thousand QSO's.
>> 
>> Please note
>> Running just WSJT-X and FT8 decodes great.
>> I tried this yesterday on 20m, switching to FT4 14080.00 lots of stn's
>> active ....no decode!!!
>> 
>> Regards
>> 
>> Ken.. G0ORH
>> 
>> Sent from my iPad
>> 
>> 
>> 
>> 
>> _______________________________________________
>> wsjt-devel mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>> 
>> 
>> 
>> _______________________________________________
>> wsjt-devel mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
> 



_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Reply via email to