Bill, Thanks for the reply. It's quite possible that I fat fingered something. I did find that closing the frequencies tab with the Settings window "X" does result in settings window being blank next time it is opened. I don't think I would have done that but of course it's possible. I could not induce a blank settings window by any other method.
Anyway, I now have a configuration with VK9CZ frequencies and hope to work them for an ATNO. 73, Andy, k3wyc On 14/11/2019 14:37, Andy Durbin wrote: I cloned my baseline FT8 configuration file and renamed that copy to VK9CZ. I then added the published VK9CZ FT8 operating frequencies. When I closed settings I found that none of the added operating frequencies was shown in the main window frequency list. I then opened file/settings and was presented with a blank settings window. I reverted to my FT8 baseline configuration and opened file/settings. The normal Settings window was displayed. I switched to my VK9CZ configuration and opened file/settings. Now the normal settings window was displayed but the added frequencies were still missing. I "inserted" one new frequency and this was added ok. I then inserted the rest of the VK9CZ frequencies and no anomalies were seen. Has anyone else seen similar issues when inserting new frequencies? I doubt the problem is easy to reproduce. Andy, k3wyc Hi Andy, most likely that you forgot to exit the Settings dialog by clicking the "Ok" button. Settings changes are discarded unless you exit the Settings dialog by clicking "Ok". The blank Settings dialog window is a known issue, you can fix it by resizing the Settings dialog window. 73 Bill G4WJS.
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
