Hi Josh! Is there any way someone could make a small change in the callbacks for setting frequencies on the waterfall? It would be much simpler to set the TX freq with the left mouse click rather than the RX frequency. I run remote from a phone or tablet and it's complicated to change only the TX frequency. There is almost no reason to change the RX frequency via the waterfall.
Al Gerheim Horribly mistyped on my droid. On Wed, Dec 25, 2019, 12:52 PM Josh Rovero <josh.rov...@gmail.com> wrote: > Bill, et al, > > Windows 10 Home, 64-bit, Version 1909, Build 18363.535 > WSJT-X 2.1.1 > > When I first start 8 x WSJT-X instances on this i7 PC, they all decode FT8 > frames and save WAV files for every time segment. Each WAV file is 352K in > size. > > After some time (minutes), they all fall into the "every other cycle" > decode pattern, WAV files are not produced for the non-decode times, even > though the "Save -> Save All" menu item is selected. > > For example, the following files were saved and decoded today. The > missing segments had plenty of signals in them, but no WAV file was > produced, and there were no decodes: > > 191225_172900 - good > 191225_172915 - missing > 191225_172930 - good > 191225_172945 - missing > 191225_173000 - good > and so on > > Take care, happy holidays to all, > -- > P.J. "Josh" Rovero http://www.roveroresearch.org > Ham Radio: KK1D http://www.roveroresearch > <http://www.roveroresearch.org/>.net > http://www.roveroresearch.info > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
