OK...let's call it 4-pass then....I wasn't including the rx offset as pass#1.
I didn't think anything was happening after what you're calling the 3rd pass
occurs...but 3 more decodes show up.So that's the AP or some decodes are still
being worked on after the 3rd pass?
Mike
On Thursday, December 26, 2019, 08:50:50 AM CST, Bill Somerville
<g4...@classdesign.com> wrote:
On 26/12/2019 14:36, Black Michael via wsjt-devel wrote:
> Is there a 3-pass going on now in 2.1.2?
> I'm seeing 3 passes from the decodes.....
> de Mike W9MDB
Mike,
this is nothing new. The first decode attempt is at the Rx audio offset,
then another across the passband, and a third after subtracting
facsimiles of the decodes so far. There are also different decoding
strategies attempted on each candidate signal depending on the decoding
depth settings and whether AP decoding is enabled, at least until a
successful decode is achieved for each candidate.
73
Bill
G4WJS.
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
