Following on to discussion in the VP8PJ group https://groups.io/g/VP8PJ/topic/new_log_upload/71799592 I had one situation attempting to work VP8PJ. I was in hound mode and he came back to me with a signal report. After several reply attempts from me, he came back with *a different signal report*. This doesn't make sense to me; if he heard me at a different strength it would have been hearing my "R" + signal report, and the correct response from the fox should have been RR73.
I was using JTDX, but it seems to me the problem was at the fox end. Excerpt from all.txt below: 20200305_220100 -16 0.4 364 ~ KF3CP VP8PJ -19 20200305_220100 -15 0.4 304 ~ W8DLD VP8PJ RR73 1 20200305_220100 -15 0.4 304 ~ W9CSX VP8PJ -14 1 20200305_220117.924 Transmitting 14.09 MHz FT8: VP8PJ KF3CP R-16 20200305_220130 -19 0.4 365 ~ KF3CP VP8PJ -19 20200305_220130 -20 0.4 425 ~ W4SO VP8PJ +06 20200305_220130 -19 0.4 305 ~ W8DLD VP8PJ RR73 1 20200305_220130 -19 0.4 305 ~ W9CSX VP8PJ -14 1 20200305_220145.025 Transmitting 14.09 MHz FT8: VP8PJ KF3CP R-19 20200305_220200 -23 0.4 365 ~ W8DLD VP8PJ RR73 1 20200305_220200 -23 0.4 365 ~ KF3CP VP8PJ -20 1 20200305_220215.031 Transmitting 14.09 MHz FT8: VP8PJ KF3CP R-23 Can anyone help me understand if this is indeed an issue at the Fox end? Thanks, Scott KF3CP
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
