FWIW ... Tx5 is not cleared just in case you have to resend an RR73 if
your QSO partnet did not receive it.
Neil, KN3ILZ
On 5/26/2020 6:28 AM, Alan Groups wrote:
Redundant QSO left over from previous session - using ESC key cleared
all fields except TX5. This cleared itself on a program restart.
False decodes - rig left running for an hour or so with no antenna -
nothing seen.
With just a bit of coax to a switched dummy load and the antenna
disconnected albeit with a ground return from the 55m coax feeder
available via the rig power leads there were a few decodes and visible
QSO's on 40m - impressive given that pickup must have been purely
capacitive from the coax!
Alan G0TLK
On 25/05/2020 11:19, Alan Groups wrote:
Hi, in my view goalposts are fine with the white line beneath the RX
one and the waterfall background no longer quite black.
Window resize issue on turning menus off has gone.
Nothing else checked yet.
Alan G0TLK
--
This email has been checked for viruses by AVG.
https://www.avg.com
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
