Hi Dave,
As you note, the decodes counter displays the number of decodes found in
the most recent Rx sequence that produced any.
That was originally intended, but perhaps it is more useful to show zero
when none are found. The GA release will do so.
-- 73, Joe, K1JT
On 6/1/2020 11:29 AM, Dave Bernheisel via wsjt-devel wrote:
I am using version 2.2.2-rc3 on windows 10 64 bit system.
I have noticed that the new counter for number of decodes does not reset
for each interval. It appears to report the number of decodes during
the last interval for which there was a decode. Following an interval
in which there were no decodes - no new entries in the Band Activity
window, the counter continues to display the number of entries in the
last interval shown in the band activity window.
When monitoring a very quiet band - it appears that the counter is not
matching the 'No signals' present condition. If the interval of
inactivity lasts longer than the height of the wide graph display, it
appears to be an error.
Dave, N2DPF
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
