Hey Reino,

I've tried dragging the border to the right with no luck.  Being able to enlarge the window such as you have done would solve the problem forever! :-)

73, Bill


On 06/09/2020 08:14:29, Reino Talarmo wrote:

Hello Bill,

Thanks for the pictures. I myself use Windows PrtSc key take copy of the screen (or just the active window by Alt+PrtSc, does not work in this case) and insert that into Paint. There I select the part I want to paste and Copy it. Then I can past it into the mail as below. This requires that also recipient has HTML support in mail.

The issue you presented is a full question mark to me. As you see in my screen the frequency list is much wider and all fits in!

Unfortunately I am just a user of the program and cannot tell whether there is a simple corrective action available. Perhaps font size change could affect. At least an excessive font size 20 caused the same display as you have!

The circled S is explained in section 10.3. Left in User Guide:

A small colored circle appears in green if the CAT control is activated and functional. The green circle contains the character S if the rig is detected to be in *Split* mode. The circle becomes red if you have requested CAT control but communication with the radio has been lost.

73, Reino OH3mA

*From:*Bill Mullin [mailto:mrb...@aa4m.com]
*Sent:* 9. kesäkuuta 2020 16:39
*To:* Reino Talarmo <reino.tala...@kolumbus.fi>; wsjt-devel@lists.sourceforge.net
*Subject:* Re: [wsjt-devel] Drop down band-selector list problem

Hello Reino,

For some reason my screen capture program would not work with the drop down menu, so I photographed the before and after menus.

This is the menu before adding another FT8 frequency:

http://aa4m.com/Pic1.jpg

And this is the menu after adding 7.071, FT8, All regions:

http://aa4m.com/Pic2.jpg

As you can see, the menu is still usable, it is just a little truncated.

While at it, what is the "S" in the green circle for?

Thanks & 73, Bill  AA4M


On 06/09/2020 00:11:29, Reino Talarmo wrote:

    Hi Bill,

    You may add a picture into the mail itself using HTML encoding.
    Just make a copy of the picture and drop it into the mail.

    Without a picture it is impossible to comment what you really see
    and how exactly you added those using Menu. Do you mean by
    ‘manually’ that you typed frequency into the box left to the
    circle and frequency display? Is the frequency display background
    still black or does it change into red?

    I cannot repeat your symptoms in my v2.2.1. I am using Finnish
    keyboard and I need to use ‘,’ as decimal separator. If I try to
    use ‘.’ then it is just ignored and e.g. 7.041 it taken as 7041
    MHz. But that may not be you issue.

    Did you added frequencies for ‘FT8 mode’ only, not ‘all’?

    73, Reino OH3mA

    *From:*Bill Mullin [mailto:mrb...@aa4m.com]
    *Sent:* 9. kesäkuuta 2020 4:20
    *To:* wsjt-devel@lists.sourceforge.net
    <mailto:wsjt-devel@lists.sourceforge.net>
    *Subject:* [wsjt-devel] Drop down band-selector list problem

    I posted this in another forum but got no answer, so I thought I'd
    try here.

    This problem is difficult to describe!  From the new WSJT-X 2.2.1
    user's manual:

    "On a trial basis, and in response to numerous suggestions from around
    the world, we have added a second set of suggested dial frequencies
    for FT8 on three HF bands and also on 6 meters. The new suggested dial
    frequencies are 7.071, 10.133, 14.071, and 50.310 MHz. These
    frequencies will appear in your drop-down band-selector list after you
    go to the "Settings | Frequencies" tab, right-click on the frequency
    table, and select "Reset".  Alternatively, you can add the new FT8
    frequencies manually."

    I tried adding the new frequencies both using the menus and then
    manually.  In both cases the FT8 portion of the drop down
    band-selector list become somewhat truncated. The list is still
    usable so this should be considered a cosmetic problem only.

    Note that I'd include a picture of the scrambled menu if I thought
    the group accepted attachments.  Note also the the FT4 menu is not
    affected by additions to the FT8 menu.

    73, Bill - AA4M


_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Reply via email to