The rig is Yaesu FTdx3000 connected with a Microham II keyer. I suppose that is what I am trying, yes. And when I disconnect N1MM+, WSJT-X works fine with both COM4 and COM5.
The problem is that I am trying to set this up in a club, where most of the users are new licencees, and I want to make the setup as uncomplicated as possible. Getting rid of the Microkeyer is not an option, I am afraid. Tom OH6VDA > 10. jun. 2020 kl. 20:23 skrev Black Michael <[email protected]>: > > > It sounds like you're trying to do port sharing. I'm don't believe the > microham supports that. I believe it does support PTT on one com port and > CAT on another. And it can also echo CAT responses to another COM port for > monitoring...but not CAT control. > > So if you turn off N1MM and connect WSJT-X to COM4 it all works OK? > > What kind of rig do you have? There are solutions for having multiple > programs (like N1MM and WSJT-X) sharing the rig. > > Mike > > > > > On Wednesday, June 10, 2020, 08:06:38 AM CDT, Tom Ramberg via wsjt-devel > <[email protected]> wrote: > > > First it happens when I set the Com port In the radio tab WSJT-X settings (in > this case COM5) and press the "Test CAT" button. It turns red, and a pop up > window appears with the message "Rig Failiure. Hamlib error: I/O error while > opening connection to rig". See screenshot. > > > If I ignore the message by pressing OK, The button turns green, and if I exit > the settings and try to change bands, it seems to work okay. But then on a > second try to press the "Test CAT" button, the second error message appears, > saing "Hamlib error: Communication bus colision while trying to get the > current VFO, se screenshot. > > On CAT1 (in this case COM4), I am connected to N1MM+. > > I have also tried to use Omnirig, but that just makes WSJT-X crash without > any warning messages at all. > > Tom OH6VDA > > > 10. jun. 2020 kl. 12:44 skrev Bill Somerville <[email protected]>: > > > > On 10/06/2020 07:45, Tom Ramberg via wsjt-devel wrote: > >> Starting WSJT-X with FTdx3000 and using 2nd CAT port in MicroHams device > >> router gives Hamlib error. > >> > >> de OH6VDA TOM > > > > Hi Tom, > > > > what is the full error message, including details, please? When does it > > happen? > > > > 73 > > Bill > > G4WJS. > > > > > > > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
