It’s been fixed. Mike w9mdb
Sent from my iPhone > On Jun 11, 2020, at 2:11 PM, Mark Spencer <netsyn...@gmail.com> wrote: > > > Hi. > > Thanks for all the efforts that the dev team has put into the latest version > of WSJT-X. I have started doing my pre June VHF contest preparations and > noted some odd behaviour at times when using CAT control with one of my Icom > 706MkiiG's. When switching between 50 Mhz and 144 and 432 Mhz, at times > the first digit of the frequency seems to be dropped. > > Ie. When switching from 50.313 FT8 to 144.174 FT8 the display on the radio > will at times show 44.174. Switching between HF and 50 Mhz seems to work > fine so it appears the extra digit for 144 and 432 Mhz may be causing issues ? > > I have never noted this behaviour before with this radio and I have seen this > behaviour with both a windows 7 laptop and windows 8 tablet PC running WSJT-X > version 2.2.1 a17eb9 > > This is not a major issue for me but I thought I should mention it. (I often > ran this radio without CAT control in the past and could do so again in the > future.) > > I used the same radio, interfaces and tablet PC during the January contest > and switched between bands via CAT with an older version of WSJT-X without > issue. Using CAT and Split does make using FT8 easier in view. > > My apologies in advance if this issue has already been reported and I have > not seen the relevant emails. > > 73 > Mark S > VE7AFZ > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
