On 29/06/2020 03:47, Jim Brown wrote:
There are times when it could be quite helpful to be able to switch
special operating features on and off from the main operating window.
One of those times occurred this weekend, when I wanted to be able to
switch between FD messages to work FD stations and normal mode to work
DX stations. My primary objective was to pick up new grids and DX
entities on 6M. At other times, it can be useful to turn DXpedition
Mode on and off.
Thanks and 73,
Jim K9YC
Hi Jim,
rightly or wrongly, settings that require more than trivial internal
reconfiguration are placed on the Settings panels. When any Settings
change is accepted WSJT-X goes through a large number of
re-initializations to ensure that everything is consistent with any
changed settings. In many ways such settings changes are similar to
operating mode changes or rig control changes. Many users find that
creating a new configuration is the easiest way to initiate such
changes. Switching configurations is equivalent to restarting the
application with a different collection of settings.
73
Bill
G4WJS.
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
