Think a smaller issue, but also happened on other stations:
Sometimes I try to answer a CQ with a double click in the Band Activity Part - but not the station is used, which I had selected. Example: I did a double click on IU8MOA - but N9FN was used. It is almost happened, if something was decoded a little bit later Before this single one was happened, I thought it is only happened if the Band activity is scrolling - but in this case it was not the case (timestamp = 160815). Think the best way is to store the position / CallSign of the first click. And the second click should only be used to change the RX Frequency and enable Tx (if activated). But for the stored CallSign of the first click. I have the impression this is happened also in installations of other OM/YL. Sometimes I get an answer even I didn't send a CQ, only was a call with another station. Think this is not a big issue, but should be easy to change in the software. My System: Windows 10 64-bit, WSJT-X 2.2.1 (not 2.2.2 of course I have always an additional active session with WSPR). 73 de Roland, DK4RH
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
