In the Log QSO window the call sign is changed from W5KDJ to 1W. Did that happen automatically as that was the "call sign" in the RR73 message that initiated the logging procedure, or is that entered manually by K0VM?
73 Frode LA6VQ man. 13. jul. 2020 kl. 17:56 skrev Bill Somerville <g4...@classdesign.com>: > On 13/07/2020 16:44, Bill Somerville wrote: > > On 13/07/2020 16:21, Al wrote: > > (wsjt-x 2.2.2 Win10 2004 ) > FYI.. > This sequence ended strangely.. > > > AL, K0VM > > Hi Al, > > nothing strange there. You QSO partner acknowledged your report to him, on > the third resend with a non-standard message, something he can do as his > callsign is sufficiently short and he chose not to address it to your > callsign. He has sent the equivalent of an RR73 message and can be seen > going immediately on to working another station, so I think you are > perfectly OK to log the QSO as complete two-way. There must always be some > doubt that the message "R 1W W5KDJ 73" was actually addressed to you, but > given the context it is probably fine. > > 73 > Bill > G4WJS. > > Hi Al, > > note that, critically, if there had been an extra pair of periods between > the CQ by W5KDJ at 151200, and his response at 151230, with no decoded > message from W5KDJ. Then you could make no such assumption since he could > be signing off with a completely different station, i.e. not with you. > > 73 > Bill > G4WJS. > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
