Hi today I have reinstalled 2.3.0rc1 64 bit on ubuntu 20.04 from the deb package with no problem. I have also compiled from source on my RPi Buster successfully.
The first bug I have confirmed exists I have replicated on ubuntu 20.04. The use case is: - start wsjtx - change mode from an 'old' mode to FST4 or FST4W - waterfall stops updating and wsjtx has to be killed from the command line. If the mode is already FST4 or FST4W then you can change to an 'old' mode ok. The second bug I have confirmed exists on the RPi. Use case: - start wsjtx from command line like "wsjtx --rig-name=FST4W" - enter Settings - set radio to FT-817 on /dev/ttyUSB0 - press 'Test CAT' - output in terminal is: pi@raspberrypi:~ $ wsjtx --rig-name=FST4W libEGL warning: DRI2: failed to authenticate qt5ct: using qt5ct plugin qt5ct: D-Bus global menu: no Hamlib: rig_get_vfo: no get_vfo Hamlib: rig_get_vfo: no get_vfo Hamlib: rig_get_vfo: no get_vfo Hamlib: rig_get_vfo: no get_vfo Hamlib: rig_get_vfo: no get_vfo Hamlib: rig_get_vfo: no get_vfo Hamlib: rig_get_vfo: no get_vfo Hamlib: rig_get_vfo: no get_vfo Hamlib: rig_get_vfo: no get_vfo Hamlib: rig_get_vfo: no get_vfo The Test PTT button does not activate. When starting wsjtx from the menu option the 'Test CAT' button works as expected (although it doesn't turn green but does activate the Test PTT button). On ubuntu 20.04 with my IC-7300 I get the following output: simon@simon-desktop:~$ wsjtx --rig-name=FST4W Hamlib: rig_get_vfo: no get_vfo Hamlib: rig_get_vfo: no get_vfo Hamlib: rig_get_vfo: no get_vfo Hamlib: rig_get_vfo: no get_vfo Hamlib: rig_get_vfo: no get_vfo Hamlib: rig_get_vfo: no get_vfo However, the Test CAT button does turn green but the Test PTT button does not activate. As with the RPi when starting wsjtx from the menu option the 'Test CAT' button works as expected. I have had another issue on the RPi where my FST4W signals stopped being decoded by anyone. When I got the 20.04/7300 combo working I was able to monitor my own signals and could see that although the tx frequency was set to 1442 Hz the tones were actually being transmitted on 1228 Hz. I had previously set the Rx freq to 1495 Hz, resetting this to 1500 Hz and it works ok although I cannot replicate this issue. 73 Simon G0FCU.
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
