I have experienced a problem with WSJT-X (64 bit) version 2.3 while operating FST4 on 630 meters. I never experienced this same problem while running JT-9 on earlier versions of WSJT. I'm running Windows 7 on a Dell Optiplex 790. The rig is a Kenwood TS-2000, homebrew transverter, and an interface that uses TX audio from the computer to key the radio. Therefore, VOX is selected in the RADIO configuration menu under SETTINGS. My problem may not be present using DTR or DSR keying. Everything initially works fine, but after the program has been running for a while, and then clicking on the TUNE tab, the transmitter keys normally, but does not want to unkey by clicking on the TUNE tab again. The TX audio from the computer will stop for several milliseconds but then start again keeping the transmitter keyed. Clicking on the TUNE tab repeatedly will eventually stop the tone and unkey the radio. The TUNE tab stays highlighted in red until the tone quits. Sometimes while clicking on TUNE to unkey the radio, the TX tone from the computer will generate a second tone or a tone on a different frequency. This problem seems to get worst the longer the program runs and how many times you key the radio using the TUNE tab. Other than that, version 2.3 has run slick as a whistle running FST4. I have not tried other modes or bands other that 630 meters. Jim, K4AEK
-- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
