Hi Daniele, It is a known issue. I think that easiest is to disable Monitor before a band change and envoke it after the band change. Another possibility could be Erase of Band activity display before a band change.
73, Reino OH3mA -----Original Message----- From: Daniele Forsi [mailto:[email protected]] Sent: 22. joulukuuta 2020 0:14 To: [email protected] Subject: [wsjt-devel] Wrong frequency written in ALL.TXT when changing band during decoding Hello, I was using WSJT-X v2.3.0-rc2 on 30 meters, then I changed to 20 meters before the decoding phase was completed and the last two decodes were written to the ALL.TXT file with a frequency of 14.074 instead of 10.136. Here are the last lines in ALL.TXT and the F6DAY station was on 30m, not on 20m which was completely closed and there were no signals: 201221_211530 10.136 Tx FT8 0 0.0 795 CQ IU5HKX JN53 10.136 Rx FT8 -18 -0.0 433 OE6VHF VK7AC 73 10.136 Rx FT8 -10 0.2 422 KE0NRE F6DAY R-19 10.136 Rx FT8 -9 0.1 530 CQ OH1NHX KP01 10.136 Rx FT8 -16 0.1 1313 IZ7PMQ R0SR RR73 201221_211630 10.136 Tx FT8 0 0.0 795 OH1NHX IU5HKX JN53 10.136 Rx FT8 -18 -0.6 1787 T77C RD3BTW -09 14.074 Rx FT8 -11 0.2 403 KE0NRE F6DAY R-19 14.074 Rx FT8 -10 0.1 993 F6BIA R9RT -04 There are only 3 lines with F6DAY in my ALL.TXT: 10.136 Rx FT8 -19 0.2 801 KE0NRE F6DAY JN05 10.136 Rx FT8 -10 0.2 422 KE0NRE F6DAY R-19 14.074 Rx FT8 -11 0.2 403 KE0NRE F6DAY R-19 and only the first one is visible on pskreporter.info and pskreporter.de : 2020-12-21 21:12:44 31min F6DAY -19 FT8 30m 10.1368 France F JN05LM 790 -- 73 de IU5HKX Daniele _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
