Does the Debian WSJT-X use hamlib as a shared library?
Sounds like that may be the problem.
There is a binary incompatibility that happened under shared library use so if
you use the rigctld-wsjtx from WSJTX it should hopefully work....not the
rigctld from hamlib-4.0
There's a future fix that will hopefully be in the 2.3.0 GA release that fixes
this problem.
Mike W9MDB
On Tuesday, January 5, 2021, 03:55:02 PM CST, Christoph Berg
<[email protected]> wrote:
Hi,
since I switched the Debian wsjtx package to hamlib 4.0 with my IC706,
Hamlib rigctld operation doesn't work anymore:
Hamlib error: Invalid parameter while exchanging VFOs
FLdigi works fine through rigctld, both with the 3.3 and 4.0 hamlib.
(Including adjusting the rig number in rigctld.)
Attaching the rig directly works better. I didn't have any problems
with 2.3.0 rc2 earlier this week, but 2.3.0 rc3 needed quite some
manual poking now (setting band and mode manually on the rig) before
wsjtx wanted to work with it. Split mode is enabled.
Christoph
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
