I'm doing search and pounce on grid squares. GridTracker shows me a new grid and I enter the Rx frequency, call, and grid manually. That may be part of the problem. The message boxes are correct for the previous contact. Sometimes I hit tune to verify the amp is ready to go...it's a bit fussy. Probably hit Tune again to turn it off.
So, from Gene's comment, my sequence of set up Rx to watch when the station gets to 73, check tune, leads to the issue. Maybe double click on call will generate message, maybe need to hit GenStdMsg one extra time. With new new SSPA, I'm check the antenna and tuning network a lot more frequently. jeff, wa1hco On Wed, Jan 27, 2021 at 3:37 PM Bill Somerville <[email protected]> wrote: > On 27/01/2021 20:31, jeff millar wrote: > > Hello all, > > > > There is this weird problem with WSJTX on startup. This is with > > Ubuntu 20.04 > > > > WSJTX starts, starts receiving, responds to Tune every thing is normal. > > But on Enable Tx and start of a Tx cycle, it keys, but no transmit > > tones. Tune works but Tx does not. the messages look right. > > > > This is after a double click on a call in the activity window. > > > > I fiddle around with stuff and it starts working. This last time I > > thought to do Generate Standard Messages and it started working. > > > > I don't know exactly what gets it out of this state or how a program > > launch causes this problem sometimes. > > > > Once it starts working, it's flawless. > > > > ideas? Anyone else ever seen this? > > > > jeff, wa1hco > > Hi Jeff, > > you mention using "Generate Std Msgs", that is probably the key, WSJT-X > will not send a blank message. > > 73 > Bill > G4WJS. > > > > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
