You would also notice the DT values getting larger over time too.
DT values should almost all be < 1 second and the vast majority < 0.5 seconds.
Mike
On Thursday, January 28, 2021, 09:37:15 AM CST, Bill Barrett
<billbarrett...@gmail.com> wrote:
Hell Gus-
When your computer stops decoding bring up a browser and type in "TIME.IS" to
see if your clock is seriously off.Hope this helps.Bill W2PKY
On Thu, Jan 28, 2021 at 10:21 AM Gustavo Barona C. <gubar...@cable.net.co>
wrote:
De: Gustavo Barona C. <gubar...@cable.net.co>
Enviado el: Wednesday, 27 January 2021 12:44 PM
Para: 'wsjt-devel@lists.sourceforge.net' <wsjt-devel@lists.sourceforge.net>
Asunto: WSJT - DECODING PROBLEMS
Gentlemen:
I started using WSJT software last June and since then I have faced the problem
that it suddenly stops decoding, even for several days, receiving both the
radio and the WSJT (waterfall) good signals, and then, one day works perfectly
for one or two weeks, and, other day stops again. I am in the stage of not
decoding since January 22 last week, after fully decoding since January 16.
Between Dec. 5 and Dec. 11, another period of no decoding. These are the last
cases.
The curious thing is, that I have another computer with the WSJT installed but
not connected to any radio, and it does decode in real time. What is the
explanation to this?
I have seen in forums, a lot of people commenting the same problem and every
person suggests different solutions, but I have not heard about consulting you
about this matter.
Are you, as developers, aware about this instability?, because it is very
strange. Same computer and no configuration modifications (computer and WSJT),
is there any logical cause for this problem?
My conditions are:
WSJT version: 2.2.0-rc155
O.S: Windows 7 Professional
Tigertronics SignaLink USB
Computer: Laptop DELL Latitude E5450, RAM 16GB, HD free space 296GB
Exact sequence steps: Start WSJT to see if it is working
In June I was using the Kenwood TS-430S (identified as NONE in the WSJT
configuration), but in December I got the Kenwood TS-590S and it is configured
in the software according to the Kenwood instructions.
I will highly appreciate your comments.
73,
Gustavo Barona C. HK5FCI
gubar...@telmex.net.co
Cali - Colombia
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
--
Bill Barrett
352-437-4758_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
