Sorry, I did not follow where you want me to save the file. I am not sure where the WSJT config files are located.
Sent from Mail for Windows 10 From: Bill Somerville Sent: Friday, January 29, 2021 3:14 PM To: wsjt-devel@lists.sourceforge.net Subject: Re: [wsjt-devel] Hamlib error in RC4 On 29/01/2021 19:21, Tim Selner wrote: Hamlib error in RC4 I installed WSJT-X RC4 and I am having issues. I am running Windows 10 and an IC-735. Everything was working fine on RC3 but now I am have problems transmitting using RC4. Freq control looks to be OK but I am not getting consistent PTT. When I go to Settings / Radio I can test the CAT box and it turns green. When I test PTT I am getting this error: Rig Failure Hamlib error: Command rejected by the rig while getting current VFO mode. If I go to “Tune” on the main screen I am often able to transmit for several seconds until It drops out of transmit and I get the following error: Hamlib error: Command rejected by the rig while getting current VFO mode Timestamp: 2021-01-28T23:36:49.330Z Please call of email me if there is anything I can do, and thanks for your hard work!! Tim Selner W9SRW tsel...@new.rr.com Hi Tim, so I can see what is happening, please put the attached file into your WSJT-X configuration files directory (the same as the log files directory on Windows - "Menu->File->Open log directory") then restart WSJT-X and reproduce the issue in the shortest time possible (keeps the log file small), quit WSJTX, then send me the file WSJT-X_RigControl.log that will have been created on your Desktop. Send the file direct to g4wjs <at> classdesign <dot> com. 73 Bill G4WJS.
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
