Hi, I observed a number of unexpected program exits with release 2.3.0 in WSPR mode / band hopping mode. The exit is reproducible, the timing of when it happens however, is not.
The radio setting is : Hamlib NET rigctl, connected to a network server (SparkSDR), PTT : CAT, Transmit Audio source : rear, Mode : None, Split : Fake it. The last syslog entry with filter set to debug is : [2021-02-03 09:33:59.108031][00:00:14.896695][RIGCTRL][debug] () : netrigctl_get_ptt called The last syslog entry with filter set to trace is : [2021-02-04 06:55:54.040793][00:06:01.833448][RIGCTRL][trace] C:\Users\bill\src\k1jt\wsjtx\Transceiver\HamlibTransceiver.cpp(1008) do_poll: rig_get_mode mode=USB bw=4000 [2021-02-04 06:55:54.040793][00:06:01.833460][RIGCTRL][debug] () : rig.c(2586):rig_get_ptt entered [2021-02-04 06:55:54.040793][00:06:01.833469][RIGCTRL][trace] () : elapsed_ms: start = 1612421753,35880800 [2021-02-04 06:55:54.040793][00:06:01.833481][RIGCTRL][trace] () : elapsed_ms: elapsed_msecs=1005 [2021-02-04 06:55:54.040793][00:06:01.833490][RIGCTRL][trace] () : rig_get_ptt: cache check age=1004ms [2021-02-04 06:55:54.040793][00:06:01.833497][RIGCTRL][trace] () : rig_get_ptt: cache miss age=1004ms [2021-02-04 06:55:54.040793][00:06:01.833505][RIGCTRL][debug] () : netrigctl_get_ptt called [2021-02-04 06:55:54.040793][00:06:01.833514][RIGCTRL][trace] () : netrigctl_vfostr: called vfo=VFOA [2021-02-04 06:55:54.040793][00:06:01.833523][RIGCTRL][trace] () : netrigctl_vfostr: vfo_opt=0 [2021-02-04 06:55:54.040793][00:06:01.833532][RIGCTRL][debug] () : netrigctl_transaction: called len=2 [2021-02-04 06:55:54.040793][00:06:01.833541][RIGCTRL][trace] () : rig_flush: called for network device [2021-02-04 06:55:54.040793][00:06:01.833549][RIGCTRL][debug] () : network_flush called [2021-02-04 06:55:54.040793][00:06:01.833558][RIGCTRL][debug] () : write_block called [2021-02-04 06:55:54.040793][00:06:01.833586][RIGCTRL][trace] () : write_block(): TX 2 bytes [2021-02-04 06:55:54.040793][00:06:01.833597][RIGCTRL][trace] () : 0000 74 0a t. [2021-02-04 06:55:54.040793][00:06:01.833606][RIGCTRL][trace] () : read_string called, rxmax=96 [2021-02-04 06:55:54.040793][00:06:01.833625][RIGCTRL][trace] () : read_string(): RX 2 characters [2021-02-04 06:55:54.040793][00:06:01.833633][RIGCTRL][trace] () : 0000 30 0a 0. [2021-02-04 06:55:54.040793][00:06:01.833643][RIGCTRL][trace] () : elapsed_ms: start = 0,0 [2021-02-04 06:55:54.040793][00:06:01.833676][RIGCTRL][trace] () : elapsed_ms: after gettime, start = 1612421754,40793800 [2021-02-04 06:55:54.040793][00:06:01.833686][RIGCTRL][debug] () : rig.c(2631):rig_get_ptt return The full log with the 2 program exits can be found at : https://1drv.ms/u/s!AtBGol2-BnqRhqpYeMCyimEZJVr1rQ?e=Z7Xqm4 Let me know if you need more information, or if you prefer to forward this problem to SparkSDR dev't. And a big thumbs up for the syslog feature ! 73's Erik ON4PB _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
