I will be running on 1837.5. +2K in next few hours. vk4tux
On Sat, 6 Feb 2021, 4:50 pm John H. Long Jr., <j...@thelongs.us> wrote: > Mind if I jump in here also? > > Just trying to setup FST4 tonight for the first time. > > Please also let me know when one of you are trying FST4 on 160 as I would > like to see if I am set up correctly and receiving FST4 messages. > > > Thanks, > John > KW7A > Utah, USA > > > John H. Long Jr. > KW7A > 1370 N 150E > Nephi, Utah 84648 > USA > > (435) 888-LONG > > [image: Cool] Admit it ... Life Would be Boring without me! [image: Cool] > > > -------- Original Message -------- > Subject: Re: [wsjt-devel] Release 2.4.0... > From: Jim Brown <k...@audiosystemsgroup.com> > Date: Fri, February 05, 2021 10:58 pm > To: wsjt-devel@lists.sourceforge.net > > On 2/5/2021 6:03 PM, k...@earthlink.net wrote: > > Hi, Jim: > > > > What frequency are you using FST4 on 160m? > > I'm using a dial frequency of 1837.5 and offset of about 2.4 kHz, which > puts TX/RX just below FT8. I'm using that dial frequency so that big FT8 > signals don't limit the dynamic range of the FST4 decoder. And I'm using > FST4-60, mostly at 5W. Tonight, I turned on the amp for 30-40 minutes, > but still my only report was from AZ. First night operating worked AZ, > MS, MI, and OH with 5W. I just shut down and came into the house. > > 73, Jim K9YC > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
