Bill tried again tonight with N6SS on FST4-300, and no success here decoding.
I used both 600Hz roofing filter making a very prominent seen signal N6SS, and 
tried with the  normal 3 KHz rx filter.
Tried 20 and 100 FTol. After several rx seen signal passes, there was no 
decode. TX and RX pan freq  were both set at 2000Hz

It seems ok on FST-60, I may have to give up on 300, no more ideas on this.

Thankyou

Adrian Fewster

-----Original Message-----
From: Bill Somerville [mailto:g4...@classdesign.com] 
Sent: Tuesday, 9 February 2021 1:44 AM
To: wsjt-devel@lists.sourceforge.net
Subject: Re: [wsjt-devel] WSJT-X v2.3.0 Oc42df.

On 08/02/2021 15:29, Adrian wrote:
> Working with N6SS trying FST4-300 tonight on 160m we noticed a few 
> things ;
>
> His wsjtx gui has a freq high and low parameter, whereas mine does 
> not, but has a F Tol parameter, which he has not.
>
> However both his and mine show version WSJT-X v2.3.0 Oc42df. For final
> v2.3.0 release in the help info section ?
>
> Preston was able to decode me, but I never decoded his signal even 
> though prominent on the waterfall.
> Preston was also using ~500 Hz audio frequency whereas I used 2000 Hz.
> He as at 1.839 whereas I was at 1.8375
>
> Would the low audio frequency effect signal fidelity for decoding ?
>
> I am trying to see why I could not decode ?
>
> Adrian Fewster

Hi Adrian,

the differences you see are due to you having "Settings->General->Single 
decode" checked and N6SS not. In single decode mode the decoder only attempts 
to decode signals within the selected  Rx offset and frequency tolerance around 
that, only the first successful decode is printed. With single decode not 
checked multiple signals may be decoded within the specified low and high 
frequency limits after an initial decode attempt at the selected Rx offset ±20 
Hz.

You have not provided enough information to determine the one way decoding, but 
the above should allow you to assess if it was merely a settings issue.

73
Bill
G4WJS.



_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel



_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Reply via email to