Hello Joe, may I ask for one item to be added to the Quick Start Guide for Q65?
"If using Q65 on EME the option on the setting page for 'Decode after EME delay' must be ticked before you use Q65 for EME." or similar wording that conveys the needed message. I spent many nights seeing zero decodes on 50 MHz EME using Q65 and was ready to throw in the towel, could not for the life of me work out why as I have never had this option ticked when using JT65 and on that mode I have worked many stations over the last 3 years off the moon. It was not until Tim N0TB kindly prodded me to check that setting and then there was no stopping me as I knew Q65 worked as I have had many terrestrial QSO's using this mode, experimenting with the various time periods. Thanks to the team for all the hard work and for the evolution of QRA64 into Q65. Regards, Peter, vk5pj On Sat, Mar 6, 2021 at 12:30 AM Joe Taylor <j...@princeton.edu> wrote: > We are pleased to announce release candidate WSJT-X 2.4.0-rc2, which > includes the new digital mode Q65. > > Q65 is designed for two-way QSOs over especially difficult propagation > paths such as ionospheric scatter, troposcatter, rain scatter, TEP, EME, > and other types fast-fading signals. Details and recommendations > concerning the Q65 submodes are provided in the "Quick-Start Guide to > Q65", available here: > https://physics.princeton.edu/pulsar/k1jt/Q65_Quick_Start.pdf >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
