Bill: OK.. will do this (I already have a unique config for some modes). Thank you!
73, Dave From: Bill Somerville <g4...@classdesign.com> Reply-To: WSJT software development <wsjt-devel@lists.sourceforge.net> Date: Sunday, March 14, 2021 at 11:37 AM To: <wsjt-devel@lists.sourceforge.net> Subject: Re: [wsjt-devel] WSJT-X feature request: JT-65A (1270Hz) and Q65 (1500Hz) defaults On 14/03/2021 16:30, David Schmocker wrote: Dear WSJT development team: Would it be possible (easy) to establish default Tx and Rx frequencies per mode: JT-65A (Tx 1270 Hz and Rx 1270Hz) any time JT-65 mode is selected and Q65 (Tx 1,500 Hz and Rx 1500 Hz)? I realize these can be manually changed (what I do currently), but when I am coaching a new user in another country who has limited time also, having the mode-specific frequency defaults would be one less problem to overcome across language barriers and time constraints. Just a friendly suggestion.. thank you.. Very 73, Dave KJ9I Hi Dave, both of those modes have multi-signal decoders in WSJT-X and are likely to be used when more than one signal is in the rig's passband. Given that default audio offsets do not have much meaning. I would recommend setting up separate configurations for each mode used, that will recall the last used Tx and Rx offsets when switching to each configuration. 73 Bill G4WJS. _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
