Turns out the problem was solved by changing LPBridge from 500ms to 200ms
polling.
So we're good now.
Mike W9MDB
On Tuesday, March 23, 2021, 07:28:39 AM CDT, David Schmocker
<[email protected]> wrote:
GM Mike:
I can test K3S if helpful. Please provide the specific use-case/instructions
for Mac OS 10.14.6
If it’s any mode other than Q65 or JT-65, I’ll need the settings used also Very
73
Dave KJ9I
Just a question: Why select “Fake-It” with K3S? I was advised to use “Rig”
and it works well.
From: Black Michael via wsjt-devel <[email protected]>
Reply-To: Black Michael <[email protected]>, WSJT software development
<[email protected]>
Date: Monday, March 22, 2021 at 2:25 PM
To: WSJT Software Development <[email protected]>
Cc: Black Michael <[email protected]>
Subject: [wsjt-devel] Elecraft K3
Anybody out there with an Elecraft K3 or K3S willing do some testing for hamlib?
I have a report that Fake It does not work correctly on the K3/K3S so would
like to see some debug from other users to determine if this is a rig problem
or an Elecraft problem.
The behavior in Fake It is that the VFO will start walking up or down if the
transmit offset frequency is different.
Rig Split seems to work OK.
Mike W9MDB
_______________________________________________ wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
