I have also noticed this in both the 4 RC releases and the General
release of 2.4.0. I have many different configurations and it appears
that the problem exists only in the configurations where I did a RESET
in the frequency list. The pull down window gets wide enough to show all
the characters in the configurations where I did NOT do the RESET but is
narrow in the configurations where I did do the RESET. Hope this helps
scope out this issue.
73 Harry (KA2ENE)
-------------------------------------------------
On 5/25/2021 8:32 AM, Martin Davies G0HDB wrote:
I never got round to installing and trying any of the -RC versions of v2.4.0
but last night (Mon
24th) I downloaded and installed the 64-bit GA release, v2.4.0 (c19d62). My
PC, a Dell 3070,
is running Win10 (fully up to date); the PC has a 3.0GHz i7-9700 8-core CPU
with 16G RAM
and a 256G SSD.
After installing v2.4.0 I discovered that when I opened the drop-down list for
the operating
band the frequency information was truncated to only the first few characters
of the string
because the width of the 'box' containing the list of frequencies was too
narrow, so it was
impossible to see exactly what the frequency was.
When I reverted to v2.3.1 the drop-down list is displayed normally and in full,
and I can see,
for example:
50.313.000 MHz (6m)
I've just re-installed v2.4.0 and now all I can see is the frequency/band
drop-down list is:
50.3...(6m)
Has anyone else observed this 'feature' in v2.4.0?
--
73, Martin G0HDB
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
