On 29/05/2021 20:46, David Tiller wrote:
Dear WSJTX authors,
I just tried Q65 with 2.4.0 final (OSX 10.13.6), and so far, so good. I tried
using split mode with my IC 756PRO and didn't get the same results as I get on the
other modes; i.e. for TX frequencies below 1500 Hz the TX VFO does NOT 'drop down'
in frequency to ensure the audio going into the radio is >= 1500 Hz.
Example that works as expected with FT8:
Split set to 'rig', RX VFO 50.313. When I choose TX freq 500, the TX VFO
immediately switches to 50.312.
Example that doesn't work as expected with Q65:
Split set to 'rig', RX VFO 50.275. When I choose any TX frequency, the TX
VFO_stays_ on 50.275.
If I missed something in the user's guide or quick start guide, please feel
free to chastise me.
Thanks in advance, K4DET
Hi David,
Q65 has sub modes that are considerable wider bandwidth than FT8, it is
not appropriate to adjust the Tx VFO dial frequency with Q65, instead
you should simply take care to match your sound card audio output to
your rig's input to minimize production of unwanted audio harmonics.
73
Bill
G4WJS.
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
