Hi Mike Adding --vfo to the command line parameters for rigctld got things working again.
Thanks Jonathan GI7KMC On Fri, 4 Jun 2021 at 13:20, Black Michael via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > If you run rigctld with "--vfo" it should work. > > Mike W9MDB > > > > > On Friday, June 4, 2021, 03:12:29 AM CDT, Jonathan Magee < > jma...@jmagee.co.uk> wrote: > > > Hi > I just installed WSJTX 2.4.0 and I am noticing an issue with Split Rig > operation. When I change bands VFO-A changes frequency but VFO-B is not > changing frequency. > > I am using a FT-991A and I am running rigctld-wsjtx to allow different > apps to access the radio. WSJTX is set up with a rig of Hamlib Net Rigctl > with Rig Operation set to split. When I revert back to 2.3.0 , VFO-B does > get updated correctly. I am using Linux on a Raspberry Pi. > > Regards > Jonathan GI7KMC > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel