Hi Bill, Thanks for your reply. Actually the current user was part of the dialout group. I added this user once more and checked once again, but got the same error.
Two windows appear with the following text: Rig failure Hamlib error: iO Error iofunc.c (199): port_close entered iofunc.c (233): port_close return(0) Rig.c(983): rig_open return (-6) while opening connection to rig Any further ideas? Does this error occur because of a different/old version of the Hamlib? Thanks and cheers Cornel Bill Somerville <g4...@classdesign.com> schrieb am Sa., 12. Juni 2021, 23:35: > On 12/06/2021 22:13, Co Co wrote: > > Hi, > > I installed Ubuntu 20.04 (current release) and wsjtx 2.4 and lately > 2.5rc1, plugged an UsB2Serial cable (serial converter with CH341) to my > laptop. > When setting up preferences to the radio and select "none" for the rig and > PTT with /dev/ttyUSB0, then an error occur. > > It tells me, that the rig is not responding or so, exact message can be > delivered later. > It seems there is a problem in Linux accessing only ptt via USB/Serial > without trying to get in touch with a rig. > > Could you please check it out? > In Windows 10 this preference works ery well with the same adjustment. > So it can't be the hardware I think, because adapter works properly unter > Linux and can be accessed with stty. > > Thanks, 73 de Cornel DO5CR > > Hi Cornel, > > is your user in the dialout group? > > sudo adduser $USER dialout > > then restart your desktop session or reboot. > > 73 > Bill > G4WJS. > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
