Hi Joe, Is that a new requirement for the tx offset to move to the calling station tx offset ?As far as I know, that is not the behavior in 2.4 and earlier versions. 73,
Sam W2JDB -----Original Message----- From: Joe Taylor via wsjt-devel <wsjt-devel@lists.sourceforge.net> To: WSJT software development <wsjt-devel@lists.sourceforge.net> Cc: Joe Taylor <j...@princeton.edu> Sent: Sat, Jul 17, 2021 5:04 pm Subject: Re: [wsjt-devel] rc3 behaving the same If you want your Tx frequency to change to that of the CQ caller, hold CTRL down when you double-click on the CQ message. On 7/17/2021 4:44 PM, Rory Bowers via wsjt-devel wrote: > I just noticed that rc3 is behaving the same as rc1 did with respect to > double clicking a station calling CQ TEST in NA VHF mode. The transmit > frequency stays where you last were and the receive frequency moves to > the station calling CQ TEST. Hold TX Freq is not checked therefore > shouldn't both tx and rx move to the station? > Thanks! > 73, > Rory, K5CKS _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
