I am using WSJT v. 24. It has been working fine up until about a week ago. I have a Rig Expert TI-5000 which I use as the interface between my Yaesu FT-1000mp MKV and my PC.
The problem is that when I set the software to the FT 8 (or FT 4) frequency-those are the only modes that I use, the CAT system works, and my rig goes to the same frequency. About a second later my WSJT software bounces to 18.104 973. The rig stays on the original frequency. The software does decode the signals from the rig's frequency. When I try to return the decoded call, my rig pops to 18.104 973. My rig appears as though it is transmitting (I see my CQ on the upper right column in the right WSJT window) except there is no power out registered on my rig. The software does this with every band I try to decode and transmit on. Any idea what is wrong? If you can't help, is there anyone who can help? Thanks a lot &73. Jim WA9LJK
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
