David,
The about screen says I do have HRD 6.7.0.391 and like I said at first
it looked like that issue was gone, but 30 minutes later it was back.
Now the 9700 is still fine and does not show the issue. I did a bit more
testing with the 7300 and found that if WSJT-X "split mode" is set to
either Rig or Fake It the issue is present but if set to NONE there is
no twitch or mode changing, but this is only on the 7300 the 9700 does
not have this issue it is just fine in Fake It. I use HRD to pass on the
rig control so I don't have to bother with com port spliters and both
HRD and WSJT-X can talk to the radios. When I am running N1MM using
their EW1 and EW2 configurations for WSJT-X, I am using DX Lab Suite
Commander as the rig control and there are no issues, it is only when
using HRD. I have separate configurations for each radio in WSJT-X and
put the HRD focus on the needed radio to pass along rig control. Logging
is working just fine. So for now WSJT-X mode control is set to NONE and
I select DATA mode using either HRD or the radio's controls.
I thought that the issue had been solved but it wasn't. No problem the
work around works just fine. Thanks for all the input.
73 KA2ENE, Harry
----------------------------------------------------------
On 10/4/2021 4:07 PM, david--- via wsjt-devel wrote:
Harry,
You might want to try again in a day or two.
This morning I tried to download HRD 391 and found that the link was still
pointing to 357.
Apparently someone forgot to point the link to the update.
David, AK2L
-----Original Message-----
From: Harry E. Hoffman via wsjt-devel <wsjt-devel@lists.sourceforge.net>
Sent: Monday, October 4, 2021 12:39
To: Harry E. Hoffman via wsjt-devel <wsjt-devel@lists.sourceforge.net>
Cc: Harry E. Hoffman <ka2...@frontiernet.net>
Subject: Re: [wsjt-devel] WSJT-X and Ham Radio Deluxe
Sorry, looks like I spoke too soon, when I tried it again a while later the
same old behavior returned to the 7300. The mode indicator "twitches" and
the USB-D drops out. Back to WSJT-X mode setting of NONE.
Funny though the 9700 appears to still be good. Must be issues in HRD.
73 KA2ENE
---------------------------------------------
On 10/4/2021 3:01 PM, Harry E. Hoffman via wsjt-devel wrote:
Operating System is Windows 10 (20H2)
Some good news for those that had the problem of your IC-7300 dropping
out of DATA mode when using HRD as the Rig Control for WSJT-X. Not
sure if the fix is in HRD or WSJT-X as both have new versions. If you
remember with previous versions if you had WSJT-X set to use the MODE
setting of Data/Pkt, then when you switched between TX and RX the Mode
indicator on the 7300's display would "twitch" every time and
sometimes it would drop out of USB-D and go to just plain USB. The
temporary fix was to set WSJT-X mode control to NONE and set the radio
to USB-D manually. I am now running version 6.7.0.391 of HRD and
version 2.5.0 of WSJT-X and with WSJT-X set to Data/Pkt there is no
more "twitching" of the mode indicator on the 7300 and the mode
appears to stay put and not drop out of USB-D. Now that the IC-9700
Rig Control has added the missing DATA mode to the software the
IC-9700 also appears to behave well using WSJT-X under HRD Rig
Control. Check it out to see if it is working for you as well.
73 KA2ENE
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
