On 05/11/2021 22:34, Dwayne Sinclair via wsjt-devel wrote:
I was working WSJT-X F&H mode on both my local (DM03) and remote
station (CN95) Both WSJT-X were in Hound mode. Local station was on
standby monitoring same band.
I started working the Fox from CN95 and when the Fox responded to my
callsign, WSJT-X on DM03 automatically Enabled TX and tried to
respond. The antenna/tuner were not set correctly and I thew a SWR alarm.
The automatic switch to Enable TX is not a desirable feature when you
have multiple stations.
Version is Windows 64bit 2.5.1 on Windows 11.
Regards Dwayne AB6A
Hi Dwayne,
agreed that is not particularly desirable behaviour in this rather
unusual situation. The simple workaround is not to put WSJT-X into FT8
DXpediition Hound mode if you have no intention of transmitting from
that instance.
73
Bill
G4WJS.
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
