On 12/11/2021 18:09, Black Michael via wsjt-devel wrote:
This is on an Elecraft K4.
When transmitting in split mode VFOA=Rx and VFOB=Tx and one changes
the Tx frequency WSJT-X assumes since VFOB is the current VFO that it
reverses roles and sets VFOA frequency instead.
If VFOB is active and split and ptt=on then VFOB is still tx. I
really don't know if this applies to all rigs though.
Mike W9MDB
Mike,
to deal with that sort of behaviour either all rigs must do the same
thing or WSJT-X will have to determine the rig and decide if the current
VFO changes (as reported by Hamlib) when transmitting split on a rig by
rig basis. Given that a number of rigs cannot be queried for the current
VFO I would think that the best option for Hamlib is not to change the
current VFO when transmitting split.
73
Bill
G4WJS.
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
