How do you have your audio hooked up?And what do you have the Transmit Audio
Source set to in WSJT-X?
You may need--set-conf=ptt_type=RIGor--set-conf=ptt_type=RIGMICDATA
Mike W9MDB
On Sunday, March 6, 2022, 12:04:57 AM CST, jarmo <oh1...@nic.fi> wrote:
Sat, 5 Mar 2022 16:45:28 +0000 (UTC)
Black Michael via wsjt-devel <wsjt-devel@lists.sourceforge.net>
kirjoitti:
> There was a problem with muting that should be fixed in the latest
> hamlib.But I'm not sure this is related to what you're describing
> with rigctld.
>
> Mike W9MDB
Hi Mike
I compiled latest hamlib and no better.
It can be tested by choosing wsjtx setting first radio as TS590SG or
FT857, default settings, everything works OK, audio out, TX goes
ok.
BUT change radio into Hamlib Net rigctl, start rigctld first with
"script" or manually, then try TX, audio out is muted.
I have not found reason, but as said earlier, this started when took
version 2.5.x of wsjtx in use.
I'm not sure, if Fedora has this fault. Is it change from
ALSA-PULSEAUDIO into ALSA-PIPEWIRE audio system... Hard to test
with my skills...
Jarmo, oh1mrr
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
