Limited testing using split and fake it seems to work fine. I only performed
test cat and test ptt.
OS - Kubuntu 20.04
WSJTX 2.5.4
Rig - TS-590SG
I also have an IC-7300. If needed I can perform the same test with it.
73
Stan
KM4HQE
On 5/31/22 11:04, Black Michael via wsjt-devel wrote:
> I need everyone to test the latest Hamlib
> Testing in Rig Split and Fake It would be appreciated.
> Successes/Failures please report.
>
> New hamlib for installation directions
>
> #1 Shut down WSJTX/JTDX
>
> #2 Download either the 32-bit or 64-bit DLL matching the 32/64-bit version of
> WSJTX/JTDX -- hopefully your browser doesn't block it but may warn you
> multiple times.
>
> If you can do a "Save As" you can save it directly in \WSJT\WSJTX\bin and
> replace the libhamlib-4.dll that is there.
>
> http://n0nb.users.sourceforge.net/dll32/libhamlib-4.dll
>
> http://n0nb.users.sourceforge.net/dll64/libhamlib-4.dll
>
> Linux/Unix/Mac users need to compile the latest tar file from
> http://n0nb.users.sourceforge.net/
>
> #3 If you don't save directly you need to open a file browser and move the
> file that way.
>
> If you're not familiar with that here's a video on the file browser -
> https://www.youtube.com/watch?v=AyVqCJrs9dk
>
> Mike W9MDB
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
