Perhaps tuning your VFO 200 Hz lower will do the trick? I have adjusted the frequency tables down 500 Hz and use a 5 kHz filter, and everyone is in the passband without difficulty.
George J Molnar College Park, Maryland KF2T FM19ma > On Jun 22, 2022, at 8:42 PM, Notko Mermerski via wsjt-devel > <[email protected]> wrote: > > > Andy, > I have start frequency of Wide Graph at 100Hz, even tried with start at 0Hz > Rx freq. never goes below 200. Same for Tx freq. > Same thing if I enter numeric values in corresponding boxes. Should mention > that I am running FT8/4. > > 73 Notko/SA5NTK > > From: Andrew Neumeier via wsjt-devel > [mailto:[email protected]] > Sent: den 22 juni 2022 21:56 > To: Notko Mermerski via wsjt-devel <[email protected]> > Cc: Andrew Neumeier <[email protected]> > Subject: Re: [wsjt-devel] Change request > > Notko, > > Can you not just change the start frequency in the Wide Graph? Mine is set > at 100hz. > > > 73, > Andy, ka2uqw > > > > On Wednesday, June 22, 2022 at 03:44:53 PM EDT, Notko Mermerski via > wsjt-devel <[email protected]> wrote: > > > Hi everybody, > > > > I am running WSJT-X 2.5.4. > > > > Noticed that it is impossible to set Rx (green bracket) nor Tx frequency (red > bracket) below 200Hz. I can understand that there is a rationale for this > limit, but modern TRXes are capable of receiving below 200Hz. I am seeing > decoded messages below 200Hz and I would like to be able to monitor them in > the Rx pane of WSTJ-X main window. > > I am aware that there is a workaround to achieve this, but still, it is a > workaround. > > > > Would it be possible to lower this limit to at least 100 Hz? > > > > 73 Notko/SA5NTK > > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
