I noticed a new undesired behavior here using the new WSJT-X 2.6.0-RC 2 with the latest Hamlib available by Github:
When I switch FROM any band TO 21MHz band, the rig begins making a sort of band switching from previous band to the 21MHz one, without stop.
This happens ONLY when I switch over 21MHz and the only way to stop it is by manual pressing the SPLIT and the VFO A=B on my Yaesu FT-100 front panel.
I start rigctld with the command /usr/local/bin/rgctld and the additional parameters I pass to it are:
/usr/local/bin/rigctld -m 1 -r /dev/FT-100_USB1 -t 4532 -m 1021 --vfo --set-conf=post_write_delay=40 -s 4800
This is the first time so far I see this behavior which I consider of very low severity, BTW I would like to share it here.
Regards,
---
73 de Marco, PY1ZRJ (former IK5BCU)
![]()
73 de Marco, PY1ZRJ (former IK5BCU)
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
