Hello,
it's Hamlib 4.1.
Gerald DO4ZWO
Am 2022-11-01 14:15, schrieb Black Michael:
What version of hamlib?
rigctl --version
Mike W9MDB
On Tuesday, November 1, 2022 at 06:19:47 AM CDT, do4zwo--- via
wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote:
Hello,
have a new issue with the hamlib interface after having had an Update.
WSJTX is able to read VFO settings of my FT-767 GX but it's not
possible to change band by using the combobox. In this case I get
error:
Hamlib error: Invalid Parameter
rig.c(1577): rig_set_freq return while setting frequency
The rigctl command
rigctl -m 1009 -r /dev/ttyUSB0 -s 4800 -C stop_bits=2 V VFOB F 7073000
M USB 0
works fine and fldigi also.
TestCAT gives also a green button.
regards
Gerald
P.S. I use WSJTX version as offered and installed by "apt-get install
wsjtx".
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
