RC5 was built with an older hamlib. Please try the latest.
New hamlib for installation directions #1 Shut down WSJTX #2 Download either the 32-bit or 64-bit DLL matching the 32/64-bit version of WSJTX -- hopefully your browser doesn't block it but may warn you multiple times. If you can do a "Save As" you can save it directly in the appropriate WSJTX directory C:\WSJT\WSJTX\bin and replace the libhamlib-4.dll that is there. http://n0nb.users.sourceforge.net/dll32/libhamlib-4.dll http://n0nb.users.sourceforge.net/dll64/libhamlib-4.dll Linux/Unix/Mac users need to compile the latest tar file from http://n0nb.users.sourceforge.net Note: If compiling on Unix-like systems please uninstall any Hamlib package you have before installing the new build #3 If you don't save directly you need to open a file browser and move the file that way. If you're not familiar with that here's a video on the file browser - https://www.youtube.com/watch?v=AyVqCJrs9dk Mike W9MDB On Tuesday, November 29, 2022 at 12:08:03 PM CST, Jay via wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote: I just installed the new RC5 into my Windows 10 64 bit computer and am getting a Hamlib error when trying to activate CAT control. Radio is a Flex 6500 and I normally use TCP ports to control the Slice receiver, This is NOT the Kenwood emulation using COM ports. However I get this error message when I try to test the CAT connection in the Settings/Radio tab in WSJT-X RC5. See attached jpg. 73 Jay KA9CFD _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
