Hello, Some issues I noticed with RC5 on Mac, specific to using Flrig which owns the CAT control, WSTJ-X configured to use Flrig (TCP server).
MacOS 12.6.1 (Intel) Icom IC-7300 1) On start up frequency is not read (shows red/oob) 2) Clicking Test CAT (Radio tab) causes WSTJ-X to display oob/red (same as occurs on start up), Test PTT doesnt work. RC5 will TX/RX through an FT8 sequence and complete a QSO as per normal. 3) USB Dial Frequency in WSTJ-X: Displays the fake it split TX frequency (that would be used) when in receive mode. 4) If moved to non preset frequency and the TX frequency is moved on waterfall, rig frequency is moved back to nearest preset. Happens in normal and hound mode. -- General issues/suggestions 5) Adding a new FT8 frequency unchecks the preferred option on any existing preset in the same band, e.g. have to go back and manually check the preferred preset. 6) Band drop down list - can the list shown be longer (say 20 frequency shown vs 10) - so that there is not a scroll bar? Lonney K1LH _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
