Thanks much Joe,
Just didn't want to click on wrong time sequence. Thanks to the team for
a super program and support.
N4AU/Bobby
On 1/7/2023 3:52 PM, Joe Taylor via wsjt-devel wrote:
Hi Bobby,
When in the NORMAL decode mode and band is busy (35 to 50+) the
decode indicator flashes 3 times and the last is several seconds (up
to 5) into next time slot. Does this affect the number of decodes in
the Band Activity window?
The three flashes you mention occur at roughly these times into the
FT8 receive sequence:
11.8 s: Attempt to decode many of the stronger signals, even before
their transmissions are finished.
13.6 s: Main decoding pass. Subtract signals from all previous decodes
from the received data stream. Decode all possible remaining signals.
15.0 s: Subtract signals from all decodes in Pass 2. Make a final
decoding attempt on what's left, with particular attention to signals
that might be another transmission from a station on that frequency
two sequences ago.
In all passes, attention is focused first on your selected Rx audio
frequency, then on all other frequencies displayed in the waterfall,
from bottom up.
-- 73, Joe, K1JT
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
--
n...@outlook.com
n...@arrl.net
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
