Hi All: I am another op who sees this tuning regression on the IC-9700. My rig’s firmware is up to date and WSJT-X frequency tracks fine if I revert to 2.5.4 or even 2.6.0-rc1.
There was some change made to the software (either WSJT-X or hamlib) between WSJT-X 2.6.0-rc1 and later versions that introduced this bug. A marginal workaround is to increase the data rate on the IC-9700’s serial port and to make manual frequency changes on the radio very slowly. However, eventually WSJT-X/hamblib misses a frequency change, tracking between WSJT-X and the radio starts to differ, and it never recovers. It is not a complete “show stopper”, but very frustrating as it is usually necessary to tune the radio manually for normal operations, EME on 23cm for example when you want to change to “075" or “082" or wherever for a QSO. I have worked with Michael Black quite a bit on this, sent logs, tried alternate configurations, etc, but so far there has been no resolution to the bug. Thanks Michael for your help on this, but the issue still exists. The biggest clue, I think, is the fact that it was introduced with -rc2. -rc1 ran fine. This should provide a good starting point for finding out what changed. 73, Kevin > On Jan 16, 2023, at 11:19 AM, David Cutajar via Moon-net > <moon-...@mailman.pe1itr.com> wrote: > > Hi Joe > here still the issue still persists on the ic 7300 /9700 and not only mine > even another two friends of mine. > The issue is wsjt x not following the rig when turn the dial on q65/jt65 as > there normally i change qrg.But Version 2.5.4 is working ok so i got back > for the old version. > 73 David 9H1TX > > _______________________________________________ > Moon-Net posting and subscription instructions are at > http://www.nlsa.com/nets/moon-net-help.html >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
