That makes it sound like it's the wrong port. You should have two COM ports -- the Extended port is the one you want.
Mike W9MDB On Monday, August 28, 2023 at 10:07:56 AM CDT, on4ckt--- via wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote: Hello, today I tried to install WSJT-X v2.7.0-rc2 on my laptop Windows10 and connect via CAT to my Yaesu FT991. But I get the following error message in WSJT-X. Hamlib error: rig_settings_get_path: path=.hamlib_settings rig_settings_load_all: settings_file (.hamlib_settings): No such file or directory rig_open: cwd=C:\WSJT\wsjtx rig_open: C:\WSJT\wsjtx/hamlib_settings does not exist rig_open: async_data_enable=1, async_data_supported=0 serial_open: COM3 serial_setup: tcgetattr serial_setup: cfsetispeed=38400,0x000f serial_setup: cfsetospeed=38400,0x000f serial_setup: data_bits=8 serial_setup: parity=0 serial_setup: Handshake=Hardware serial_setup: tcsetattr TCSANOW serial_setup: tcsetattr failed: No error port_open: serial_open(COM3) status=-2, err=No error rig_open: rs->comm_state==0?=0 rig.c(1069):rig_open returning2(-2) Invalid configuration Invalid configuration Invalid configuration while opening connection to rig Timestamp: 2023-08-28T14:46:31.621Z On the transceiver I have adjusted the following parameters: 029=38400, 030=10msec, 031=38400, 062=OTHERS, 064=1500Hz, 066=OFF, 068=OFF, 070=REAR, 071=DAKY and 072=USB. Can someone help me further with this. Thanks in advance. -- 73's ON4CKT Rudy https://www.qsl.net/on4ckt _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
